Mounting The Electronic Unit - Ametek Drexelbrook Universal IV Quick Start Manual

1.6

Mounting The Electronic Unit

• The integral electronic unit is mounted with the sensing
element
• The remote electronic unit is designed for field
mounting, but should be mounted in a location free from
vibration, corrosives, and any mechanical damage
• Rated temperatures for mounting: mount the UIV
CM in a reasonably accessible location with ambient
temperatures between -40°F and 167°F (-40°C and 75°C)
• When installing conduit to electronic unit, be sure that
vertical conduit runs will not cause water to enter the
electronic unit housing as show below
Recommended Conduit Installation
Figure 1-2
5
Quick Start Guide