Table of Contents
Advertisement
2.5
Calibration / Configuration via Display / Keypad (Continued)
"Fct 6.01
Restore factory default
(RST FAC)"
"Fct 6.02
Pad Capcitor in PF
(PAD CAP)"
"Fct 6.03
Contrast
(CONTRST)"
"Fct 6.04
Parameter Number
(PAR NUM)"
"Fct 6.05
Parameter Offset
(PAR OFS)"
"Fct 6.06
Parameter Value
(PAR VAL)"
NO (Default)
30.0 (Default)
0 (Default)
0
0
44
Select YES to restore factory default in which
case all paramaters will be replaced with
factory default setting. Restoring the factory
default will initiate this message on the display
'DEFAULT PARAMS SET' until power is cycled.
Enter the value of an external capacitor
that must be connected to the unit. Padding
capacitors are used to reduce the sensing
element standing capacitance in order to
improve the measurement resolution
0 is the highest contrast. 20 is the lowest
contrast
0 to 65535. Contact factory
Contact factory
Contact factory
17
Quick Start Guide
Hide quick links:
Advertisement
Table of Contents
