Lancom ES-2126+ Manual page 93

LANCOM ES-2126+ und LANCOM ES-2126P
Chapter 4: Operation of Web- based Management
Only MultiHost 802.1X is the type of authentication supported in the switch.
In this mode, for the devices connected to this port, once a supplicant is
authorized, the devices connected to this port can access the network
resource through this port.
802.1x Port-based Network Access Control function supported by the switch
is little bit complex, for it just support basic Multihost mode, which can dis-
tinguish the device's MAC address and its VID. The following table is the sum-
mary of the combination of the authentication status and the port status
versus the status of port mode, set in 802.1x Port mode, port control state, set
in 802.1x port setting. Here Entry Authorized means MAC entry is authorized.
Port Mode Port Control
Disable Don't Care
Multihost Auto
Multihost Auto
Multihost ForceUnauthorized
Multihost ForceAuthorized
Table 3-3
92
Function name: 802.1x State Setting
Authentication Port Status
Don't Care Port Uncontrolled
Successful Port Authorized
Failure Port Unauthorized
Don't Care Port Unauthorized
Don't Care Port Authorized