Lancom ES-2126+ Manual page 53

LANCOM ES-2126+ und LANCOM ES-2126P
Chapter 4: Operation of Web- based Management
52
Rx Multicast Packets: Show the counting number of the received mul-
ticast packet.
Rx Pause Packets: Show the counting number of the received pause
packet.
Tx Collisions: Number of collisions transmitting frames experienced.
Tx Single Collision: Number of frames transmitted that experienced
exactly one collision.
Tx Multiple Collision: Number of frames transmitted that experienced
more than one collision.
Tx Drop Packets: Number of frames dropped due to excessive colli-
sion, late collision, or frame aging.
Tx Deferred Transmit: Number of frames delayed to transmission due
to the medium is busy.
Tx Late Collision: Number of times that a collision is detected later
than 512 bit-times into the transmission of a frame.
Tx Excessive Collision: Number of frames that are not transmitted
because the frame experienced 16 transmission attempts.
Packets 64 Octets: Number of 64-byte frames in good and bad
packets received.
Packets 65-127 Octets: Number of 65 ~ 127-byte frames in good and
bad packets received.
Packets 128-255 Octets: Number of 128 ~ 255-byte frames in good
and bad packets received.
Packets 256-511 Octets: Number of 256 ~ 511-byte frames in good
and bad packets received.
Packets 512-1023 Octets: Number of 512 ~ 1023-byte frames in
good and bad packets received.
Packets 1024- 1522 Octets: Number of 1024-1522-byte frames in
good and bad packets received.
Tx Packets: The counting number of the packet transmitted.
TX Octets: Total transmitted bytes.
Tx Unicast Packets: Show the counting number of the transmitted uni-
cast packet.
Tx Broadcast Packets: Show the counting number of the transmitted
broadcast packet.
Tx Multicast Packets: Show the counting number of the transmitted
multicast packet.