Lancom ES-2126+ Manual page 88

Function name: LACP Detail (LACP Aggregator Detailed Information)
Function Description: Show the detailed information of the LACP trunking
group.
Parameter Description:
Actor: The switch you are watching on.
Partner: The peer system from this aggregator's view.
System Priority: Show the System Priority part of a system ID.
MAC Address: Show the MAC Address part of a system ID.
Port: Show the port number part of an LACP port ID.
Key: Show the key value of the aggregator. The key value is determi-
ned by the LACP protocol entity and can't be set through manage-
ment.
Trunk Status: Show the trunk status of a single member port."---"
means "not ready".
Zeigt ihnen den Trunk-Status eines einzelnden Portes an. Dabei bedeutet "---" das der Port nicht bereit bzw. nicht aktiv ist.### Bild von einem Aggregator fehlt.
Function name: LACP System Configuration
Function Description: It is used to set the priority part of the LACP system
ID. LACP will only aggregate together the ports whose peer link partners
are all on a single system. Each system supports LACP will be assigned a
globally unique System Identifier for this purpose. A system ID is a 64-bit
field comprising a 48-bit MAC Address and 16-bit priority value.
Parameter Description:
System Priority: The System Priority can be set by the user. Its range is
from 1 to 65535. Default: 32768.
Hash Method: DA+SA, DA and SA are three Hash methods offered for
the Link Aggregation of the switch. Packets will decide the path to
transmit according to the mode of Hash you choose.
LANCOM ES-2126+ und LANCOM ES-2126P
Chapter 4: Operation of Web- based Management
87