Lancom ES-2126+ Manual page 221

LANCOM ES-2126+ und LANCOM ES-2126P
Chapter 5: Operation of CLI Management
220
set host
Syntax:
set host <#> <ip>
Description:
Sets the IP addresses for the first and secondary TACACS+ server.
Arguments:
#: Number from 1 (first TACACS+ server) to 2 (secondary TACACS+ server).
ip: IP address of the TACACS+ server
Example:
ES-2126+(tac-plus)# set host 1 10.1.1.1
Sets the IP address of the primary TACACS+ server to "10.1.1.1".
set key
Syntax:
set key <secret-key>
Description:
Sets the encryption key for the communication with the TACACS+ server.
This key must correspond with the encryption key which is configured in
the TACACS+ server.
Arguments:
secret-key: maximum 31 characters.
Example:
ES-2126+(tac-plus)# set key secret
Sets the encryption key to "secret".
set retry
Syntax:
set retry <retry>
Description:
Sets the access retry value. When the login failed for the number of retries,
the secondary login method will be used.
If TACACS+ is defined as primary access mode, the secondary TACACS+
server is used after the number of login failures has reached the access
retry value. After the number of login failures has reached the access retry