Lancom ES-2126+ Manual page 50

LANCOM ES-2126+ und LANCOM ES-2126P
Chapter 4: Operation of Web- based Management
Default: None.
Parameter description of Port 25 and Port 26:
Connector Type: Display the connector type, for instance, UTP, SC, ST,
LC and so on.
Fiber Type: Display the fiber mode, for instance, Multi-Mode, Single-
Mode.
Tx Central Wavelength: Display the fiber optical transmitting central
wavelength, for instance, 850nm, 1310nm, 1550nm and so on.
Baud Rate: Display the maximum baud rate of the fiber module sup-
ported, for instance, 10M, 100M, 1G and so on.
Vendor OUI: Display the Manufacturer's OUI code which is assigned
by IEEE.
Vendor Name: Display the company name of the module manufactu-
rer.
Vendor P/N: Display the product name of the naming by module
manufacturer.
Vendor Rev (Revision): Display the module revision.
Vendor SN (Serial Number): Show the serial number assigned by the
manufacturer.
Date Code: Show the date this module was made.
Temperature: Show the current temperature of module.
Vcc: Show the working DC voltage of module.
49