Table of Contents
Advertisement
Parameter Description:
Method: This determines the method a port uses to aggregate with
other ports.
None: A port does not want to aggregate with any other port
should choose this default setting.
LACP: A port use LACP as its trunk method to get aggregated with
other ports also using LACP.
Static: A port use Static Trunk as its trunk method to get aggrega-
ted with other ports also using Static Trunk.
Group: Ports choosing the same trunking method other than "None"
must be assigned a unique Group number (i.e. Group ID, valid value
is from 1 to 8) in order to declare that they wish to aggregate with
each other.
Active LACP:
This field is only referenced when a port's trunking method is LACP.
Active:
An Active LACP port begins to send LACPDU to its link partner
right after the LACP protocol entity started to take control of this
port.
Passive:
A Passive LACP port will not actively send LACPDU out before it
receives an LACPDU from its link partner.
Aggtr: Aggtr is an abbreviation of "aggregator". Every port is also an
aggregator, and its own aggregator ID is the same as its own Port No.
We can regard an aggregator as a representative of a trunking group.
Ports with same Group ID and using same trunking method will have
the opportunity to aggregate to a particular aggregator port. This
aggregator port is usually the port with the smallest Port No. within
the trunking group.
Status: This field represents the trunking status of a port which uses a
trunking method other than "None". It also represents the manage-
ment link status of a port which uses the "None" trunking method. "-
--" means "not ready"
LANCOM ES-2126+ und LANCOM ES-2126P
Chapter 4: Operation of Web- based Management
85
Advertisement
Table of Contents
