Table of Contents
Advertisement
Restoring ...
Restore User Configuration Successfully
Press any key to reboot system.
save start
Syntax:
save start
Description:
To save the current configuration as the start one. When you enter this
command, the CLI would save your current configuration into the non-
volatile FLASH. If you want the configuration still works after rebooting,
save the configuration using the command 'save start'.
Argument:
None.
Possible value:
None.
Example:
PSES-2126C# save start
Saving start...
Save Successfully
PSES-2126C#
save user
Syntax:
save user
Description:
To save the current configuration as the user-defined configuration. When
you enter this command, the CLI would save your current configuration
into the non-volatile FLASH as user-defined configuration.
Argument:
None.
Possible value:
None.
Example:
PSES-2126C# save user
LANCOM ES-2126+ und LANCOM ES-2126P
Chapter 5: Operation of CLI Management
133
Advertisement
Table of Contents
