Firmware Upgrade - Lancom ES-2126+ Manual

Events:Display the trap event name.
Auto Upload Enable: Switch the enabled or disabled status of the auto
upload function.
Upload Log: Upload log data through tftp.
Clear Log: Clear log data.
4.23

Firmware Upgrade

Software upgrade tool is used to help upgrade the software function in order
to fix or improve the function. The switch provides a TFTP client for software
upgrade. This can be done through Ethernet.
Function name: Firmware Upgrade
Function Description: The switch supports TFTP upgrade tool for upgra-
ding software. If you assure to upgrade software to a newer version one,
you must follow two procedures:
1. Specifying the IP address where TFTP server locates. In this field, the IP
address of your TFTP server should be filled in.
2. Specifying what the filename and where the file is. You must specify full
path and filename.
Then, press <Upgrade> button if your download is not successful, the
switch will also be back to "Software Upgrade", and it will not upgrade
the software as well.
When download is completed, the switch starts upgrading software. A
reboot message will be prompted after completing upgrading software.
At this time, you must reboot the switch to have new software worked.
Note: Software upgrade is hazardous if power is off. You must do it care-
fully.
Parameter Description:
TFTP Server: A TFTP server stored the image file you want to upgrade.
LANCOM ES-2126+ und LANCOM ES-2126P
Chapter 4: Operation of Web- based Management
123