Table of Contents
Advertisement
LANCOM ES-2126+ und LANCOM ES-2126P
Chapter 4: Operation of Web- based Management
108
Function Description: Egress Bandwidth Setting function is used to set up
the limit of Egress bandwidth for each port.
Parameter Description:
Port No.: Choose the port that you would like this function to work on
it. Valid range of the port is 1~26.
Rate: Set up the limit of Egress bandwidth for the port you choose.
Packet transmission will be delayed if the rate exceeds the value you
set up in Data Rate field. Traffic may be lost if egress buffers run full.
The format of the packet limits to unicast, broadcast and multicast.
Valid value of Port 1~24 ranges from 66~102400, and Port 25~26
ranges from 66~1024000 with the minimum unit of 1. Default value
of Port 1~24 is 102400 and Port 25~26 is 1024000.
Function name: Storm Setting
Function Description: With the storm control one can set a common limit
for the permitted percentage of the broadcast, multicast and unicast
packets in comparison to the whole data traffic. If this limit is reached, the
data packets of the corresponding type are discarded. The storm control
can be activated separately for the different packet types.
Advertisement
Table of Contents
