Lancom ES-2126+ Manual page 160

Second : 30
PSES-2126C(dhcp-boot)#
diag
diag
Syntax:
diag
Description:
Diag is used to test whether EEPROM, UART, DRAM and Flash is normal
or not.
Argument:
None.
Possible value:
None.
Example:
PSES-2126C(diag)# diag
EEPROM Test : OK
UART Test : OK
DRAM Test : OK
Flash Test : OK
Loopback
Syntax:
loopback
Description:
For Internal/External Loopback Test.
Argument:
None.
Possible value:
None.
Example:
PSES-2126C(diag)# loopback
Internal Loopback Test : OK
LANCOM ES-2126+ und LANCOM ES-2126P
Chapter 5: Operation of CLI Management
159