Table of Contents
Advertisement
LANCOM ES-2126+ und LANCOM ES-2126P
Chapter 4: Operation of Web- based Management
74
Default Applicant Mode: The mode here means the type of partici-
pant. There are two modes, normal participant and non-participant,
provided for the user's choice.
Normal: It is Normal Participant. In this mode, the switch participates
normally in GARP protocol exchanges. The default setting is Normal.
Non-Participant: It is Non-Participant. In this mode, the switch does
not send or reply any GARP messages. It just listens messages and
reacts for the received GVRP BPDU.
Default Registrar Mode: The mode here means the type of Registrar.
There are three types of parameters for registrar administrative control
value, normal registrar, fixed registrar and forbidden registrar, provi-
ded for the user's choice.
Normal:It is Normal Registration. The Registrar responds normally
to incoming GARP messages. The default setting is Normal.
Fixed: It is Registration Fixed. The Registrar ignores all GARP mes-
sages, and all members remain in the registered (IN) state.
Forbidden: It is Registration Forbidden. The Registrar ignores all
GARP messages, and all members remain in the unregistered
(EMPTY) state.
Restricted Mode: This function is used to restrict dynamic VLAN be
created when this port received GVRP PDU. There are two modes,
disable and enable, provided for the user's choice.
Disabled: In this mode, the switch dynamic VLAN will be created
when this port received GVRP PDU. The default setting is Normal.
Enabled: In this mode, the switch does not create dynamic VLAN
when this port received GVRP PDU. Except received dynamic
VLAN message of the GVRP PDU is an existed static VLAN in the
switch, this port will be added into the static VLAN members
dynamically.
Function name: GVRP Counter
Advertisement
Table of Contents
