Factory Default; Software Upgrade; Configuration File Transfer - Lancom GS-1224P Manual

Warm restart: Press Yes to confirm warm restart function. It will take
around 30 seconds to complete the system boot.
4.4.2

Factory Default

Factory default provides the function to retrieve default settings and replace
current configuration. Except the IP address setting, all settings will be resto-
red to the factory default values when "Factory Default" function is perfor-
med. If you want to restore all configurations including the IP address setting
to the factory default, please press the "RESET" button on the front panel lon-
ger than three seconds.
4.4.3

Software Upgrade

You can just click the browse button to retrieve the file you want in your sys-
tem to upgrade your switch.
4.4.4

Configuration File Transfer

You can backup your switch's configuration file into your computer folder in
case accident happens. In addition, uploading backup configuration file into
a new or a crashed switch can save much time and avoid mistakes.
LANCOM GS-1224 and LANCOM GS-1224P
Chapter 4: Operation of Web- based Management
65