Table of Contents
Advertisement
● DNS mode
— Specifies how the DNS servers (that the DHCP clients are to communicate with) are
obtained. See "DNS Mode" on page 109.
●
Assign a permanent (static) IP address to a device on your network, and view the static
IP assignment list. See "DHCP Static IP Assignment List" on page 108.
DHCP Static IP Assignment List
With DHCP, IP addresses are assigned dynamically; devices typically don't have a permanent
IP address.
However, in some cases you might want to assign a static (permanent) IP address to a device, while
still using DHCP for the rest of the devices on your network. This is also known as "DHCP reservation."
You might want to do this with, for example, a Web server, FTP server, media server.
Viewing the Static IP Assignment List
1.
Log in to the home page.
2.
Click the
Advanced Settings
3.
Select
Router > LAN
4.
Ensure DHCP is enabled (
5.
Click
DHCP Static IP Assignment List
Assigning an IP Address Based on a MAC Address
1.
Follow the above steps to display the DHCP Static IP Assignment List window.
2.
In the
Host name
3.
Enter the MAC address of the device. (If you don't know this address, see "Finding the MAC
Address" on page 131.)
4.
To have the device use the IP address you entered, ensure
5.
Click
.
Add
Removing an IP Address Based on a MAC Address
1.
Display the DHCP Static IP Assignment List window. See "Viewing the Static IP Assignment List"
on page 108.
2.
To keep the device information in the list (in case you want to re-enable DHCP for this MAC
address later on), clear the
— or —
To remove the device from the list:
a. Click the row that you want to remove.
A row of buttons (
b. Click
.
Delete
108
Configuring the Router
button.
.
DHCP Server
.
field, enter a meaningful description of the device.
Enable
check box.
,
,
) is displayed.
Delete
OK
Cancel
).
Enable
is selected.
Advertisement
Table of Contents
