Table of Contents
Advertisement
Enabling DMZ
Before you can use or configure DMZ, you must enable it.
1.
Log in to the home page.
2.
Click the
Advanced Settings
3.
Select
Router > Basic
4.
Next to
, select
DMZ
Enable
Configuring DMZ
1.
Ensure you've enabled DMZ. See "Enabling DMZ" above.
2.
Click the
Advanced Settings
3.
Select
Router > DMZ
4.
Specify the computer that you want exposed to the Internet: in the
field, enter the IP address of the computer.
If you don't know how to find the IP address, see "Finding the IP Address" on page 132.
5.
In the
Source IP Address
port triggering, or NAT) to forward to this computer:
To forward all incoming traffic, click
To forward incoming traffic from certain IP addresses:
a. Click
Restriction
.
b. In the two additional fields that are displayed, enter the start and end IP addresses of a
range.
6.
Using the DHCP Static IP Assignment List, assign an IP address based on the MAC address
of the computer that is in the DMZ. See "Assigning an IP Address Based on a MAC Address"
on page 108.
— or —
On the computer that is in the DMZ, disable DHCP, and manually assign the IP address,
gateway, and DNS server.
button.
.
.
button.
.
area, specify what incoming traffic (not handled by port forwarding,
Any
.
Destination IP Address
Configuring the Router
113
Advertisement
Table of Contents
