Table of Contents
Advertisement
GPS Information and Settings
(flashing)
The text next to the icon displays the GPS status, for example: "GPS not enabled" or
"GPS searching for satellites."
Click the icon to display the GPS Information and Settings window. The window shows the
GPS status and, if available, location information, including:
● Timestamp
— indicates the time of the last fix.
● HEPE
— Horizontal Estimated Position Error; it reflects accuracy (horizontal/vertical precision).
Note:
To use GPS, you must have a clear line of sight to the GPS satellites.
Configuring the Settings
When you're logged in, the following items are available.
(link displayed if you haven't yet accepted the GPS privacy agreement).
View privacy agreement
You cannot enable and use GPS until you accept this agreement. Click the link to view and then
accept the agreement.
— To use GPS and to configure other GPS settings, this check box must be selected.
Enable GPS
— How often the device should obtain a fix.
GPS Mode
● One-time
— Use a single fix. Use this option if you'll be using your device at the same location.
● Continuous
— Obtain fixes on a regular basis. Also known as auto-tracking. Useful for
navigation or turn-by-turn (TBT) applications (for example, driving directions).
— This button starts a one-time fix. Not displayed if
Get fix now
a GPS session is already in progress. If you change the value from
must click
before your changes take effect and the fix becomes possible.
Save
Mapping Service
— The mapping service (for example, Google Maps or MapQuest) that displays
the GPS results (in a separate browser window).
Metric units
— Specifies whether to use metric when displaying the GPS results (for example, the
altitude, speed, HEPE).
Note:
Additional settings are available at
page 101.
GPS is off (not enabled).
Before you can use GPS, you must accept the GPS privacy agreement and
enable GPS. See "GPS Privacy Agreement" on page 32 and "Enabling
GPS" on page 55.
GPS is on and available. (The GPS privacy agreement has been accepted,
and GPS is enabled.)
GPS is active (acquiring a location fix).
Advanced Settings > WAN > GPS
(above) is
GPS Mode
to
Continuous
One-time
. See "GPS Settings" on
Vertical row (of icons and text)
or
Continuous
, you
41
Advertisement
Table of Contents
