Sounds Section of the Device Tab
From the Sounds section of the
events.
1.
Log in to the home page.
2.
Click the
Advanced Settings
3.
Select
Device > Sounds
4.
Next to each of the event types, select
Sounds for the following events can be individually enabled or disabled:
● Low battery
— Useful as a reminder to charge the device. From the
can set the battery level at which an alert sounds.
● System alerts
— When you hear the device beep, use the device LCD or the Alerts window to get
information about the alert. See "Alert Information" on page 40.
Note:
System alerts include several types of events, for example:
• Critical battery
• Critical temperature
• Software update available
• Network update available
• Router settings reset
• Device startup failure
●
Connect to Internet
●
Connection lost
● Wi-Fi user has joined
intruder.
● Wi-Fi user has left
● Last user has left
— You can turn the device off if nobody will be using it for a while.
About Section of the Device Tab
To view information about your device:
1.
Log in to the home page.
2.
Click the
Advanced Settings
3.
Select
Device > About
Note:
4G information is not available if
(
WAN mode
84
Advanced Settings
tab, you can enable or disable sounds for specific types of
Device
button.
.
Enable
— Useful, for example, if you're the only one using the device, to detect an
button.
.
WAN mode
is in
Advanced Settings > WAN > Setup
or
Disable
.
Alert when
is "3G only".
.)
drop-down list, you