Table of Contents
Advertisement
Enabling Port Forwarding
Before you can use or configure Port Forwarding, you must enable it.
1.
Log in to the home page.
2.
Click the
Advanced Settings
3.
Select
Router > Basic
4.
Next to
Port Forwarding
Enabling Port Forwarding for an Application
1.
Ensure you've enabled port forwarding. See "Enabling Port Forwarding" on page 110.
2.
Click the
Advanced Settings
3.
Select
Router > Port forward
4.
In the last row of the table, click the
drop-down menu.
The values for
Start
5.
If necessary, change the range of port numbers associated with the application. Traffic will be
allowed (not blocked) if its destination port number is in the specified range.
a. In the
field, enter the number that starts the port range.
Start
b. In the
field, enter the number that ends the port range.
End
If the range consists of only one port, enter the number that you entered in the
6.
From the
Protocol
both).
7.
In the
IP Address
8.
Ensure
is selected.
Enable
9.
Click
Add
.
Disabling Port Forwarding for an Application
1.
Ensure you've enabled port forwarding. See "Enabling Port Forwarding" on page 110.
2.
Click the
Advanced Settings
3.
Select
Router > Port forward
4.
To keep the application in the list (in case you want to re-enable port forwarding later on), clear
the
check box.
Enable
— or —
To remove the application from the list:
a. Click the row that you want to remove.
A row of buttons (
b. Click
Delete
.
110
Configuring the Router
button.
.
, select
.
Enable
button.
.
Application
and
End
ports are automatically filled in.
drop-down list, select the protocol(s) used for this application (TCP, UDP, or
field, enter the IP address of the server to be accessed.
button.
.
,
,
) is displayed.
Delete
OK
Cancel
field, and select the application type from the
Start
field.
Advertisement
Table of Contents
