Table of Contents
Advertisement
4.
If the device LCD displays "Charging", "Charged", or "Powered off," press and hold the power
button
for two seconds.
5.
Wait until the device LCD displays "Connect your computer to Wi-Fi network," followed by the
network name (SSID) and password. This may take several seconds.
6.
On your computer, connect to the Wi-Fi network listed on the device LCD. If you don't know
how to do this, see "How do I Connect to Wi-Fi?" on page 126.
After you've connected to the Wi-Fi network, the device LCD displays "Open any web page to
continue setup."
7.
Open your Web browser. The "Welcome to your Overdrive" window is displayed.
Note:
This window displays the administrator password and the address of the device home page. Please
remember this information or write it down in a safe place.
This window provides several options.
●
To keep the default settings of the device, select one of the following:
The Internet
(to start surfing)
My Overdrive's home page
"Activating and Using Your Network Service" on page 14.
●
To change security settings, select
Change Password/Settings
During the device setup, you can select
● Administrator password
view and customize your device settings. The default password is "password." Choose
something easy-to-remember (yet not easily guessed by others). If you forget this password,
you'll need to reset the device to its default settings and go through the device setup (as
described in "Setting Up the Device" on page 9).
Your administrator password must be 1–20 characters long.
● Wi-Fi network name (SSID)
to identify your Wi-Fi network. The length of the Wi-Fi network name (SSID) depends on other
(to view the device status, customize settings). Proceed to
Set up my Overdrive
Set up my Overdrive
— This password is used to log in to the home page, where you can
— This name is visible to other Wi-Fi-enabled devices, and is used
.
to change the settings for the:
Setting Up the Device
11
Advertisement
Table of Contents
