Pressing The Power Button - Sierra Wireless AirCard W801 User Manual

Pressing the Power Button

Note:
The power button
this indicates the power state of the device. For more information, see "Using the Power Button to
Determine the Device State" on page 18.
If you do this to the
power button :
Quick press
Quick double-press
Press and hold for
two seconds
a. The LCD turns dark, after a configurable time of inactivity.
on the device also acts as an LED/status indicator, and may or may not be lit;
The result is:
If the device is on:
●
If the device is in standby (low power) mode, the device exits standby
mode and becomes fully powered.
●
If the LCD is enabled but dormant
●
If the LCD displays a message (such as "Press
corresponding action is confirmed or acknowledged.
●
If the Wi-Fi network name (SSID) and password were displayed on the
LCD, they are no longer displayed.
If the device is on:
●
If the LCD is enabled but dormant, the LCD becomes lit.
●
The Wi-Fi network name (SSID) and password are briefly displayed on
the device LCD; if the Wi-Fi Password Reminder is not enabled, the
password is shown as ****. See "Wi-Fi Password Reminder" on page 94
The device turns on (if it was off) or off (if it was on).
a
, the LCD becomes lit.
to ..."), the
Power Button
.
19