Table of Contents
Advertisement
5.
In the
field, enter a number between 1 and 999 (seconds).
Fix Rate
The smaller the number, the more up-to-date the location tracking will be, at the cost of shorter
battery life of the device.
Using Metric Units
To use metric units in the display of location information (for example, speed, altitude):
1.
Ensure you're logged in to the home page.
2.
Click the GPS icon
3.
In the GPS Information and Settings window, select the
Changing Your Mapping Service
To change the mapping service (for example, Google Maps or MapQuest) that displays the GPS
results (in a separate browser window):
1.
Ensure you're logged in to the home page.
2.
Click the GPS icon
3.
In the GPS Information and Settings window, from the
service.
Performance Setting (GPS)
The performance setting determines the amount of time the device waits for a satellite to be
discovered when obtaining GPS information.
1.
Log in to the home page.
2.
Click the
Advanced Settings
3.
Select
WAN > GPS
4.
In the
Performance
Automatic
— The device automatically determines the most appropriate setting to use.
— In the input field, enter the number of seconds the device should wait for a satellite to
Manual
be discovered. If this time is exceeded, an error is reported.
102
GPS Settings
(on the left side of the home page).
(on the left side of the home page).
button.
.
area, select one of the following:
Metric units
check box.
drop-down list, select the
Mapping service
Advertisement
Table of Contents
