Table of Contents
Advertisement
●
Update firmware from a file. See "Upgrade Firmware From a File" on page 60.
●
Enable standby (low power) mode (
page 43.
●
Enable TRU-Install. For information on this feature, see "TRU-Install" on page 24.
●
Download the Windows or Mac driver (if you're using USB for data transfer). See "Making a
Tethered Connection" on page 25.
●
Check for updates. See "Automatically Check for Updates" on page 58 and "Manually Check
for Updates" on page 59.
●
Reset 3G/4G configuration to default settings. See "Resetting the 3G/4G Configuration to
Default Settings" on page 100.
Display Section of the Device Tab
From the
section of the
Display
3G/4G Mobile Hotspot.
To access this tab:
1.
Log in to the home page.
2.
Click the
Advanced Settings
3.
Select
Device > Display
From this window, you can view/set these parameters:
●
Lighting of the power button
Disabling the LED" on page 77.
●
Turn the LCD on or off (
●
LCD timeout — how soon the LCD goes dormant (
Timeout" on page 75.
●
Brightness of the LCD (
microSD Card Section of the Device Tab
1.
Log in to the home page.
2.
Click the
Advanced Settings
3.
Select
Device > microSD Card
From this window, you can view/set these parameters, or perform these actions:
●
Status of the microSD slot/card.
●
Enable the microSD card slot. See "Enabling the microSD Card Slot" on page 50.
●
Folder name for the shared micro SD card. See "microSD Shared Folder Name" on page 51.
●
Set up access to the microSD Card. See "Setting Up Access to the microSD Card" on page 51.
Standby Timer...
tab, you can configure settings for the LCD of the Overdrive
Device
button.
.
on the device (
Power Button LED
LCD Backlight
). See "Turning the LCD On or Off" on page 75.
Backlight Settings
). See "Setting the LCD Brightness" on page 76.
button.
.
). See "Standby (Low Power) Mode" on
). See "Enabling and
). See "Setting the LCD
Turn Backlight Off
Advanced Settings
83
Advertisement
Table of Contents
