Monitoring Base Alarms; Monitoring Ping Targets - DPS Telecom NetGuardian 240T Hardware User Manual

35

13.3.1.1 Monitoring Base Alarms

View the status of the device connected to the discrete alarms from the M)onitor menu > A)larms option. Under
Status, the word Alarm will appear if an alarm has been activated and Clear will appear if an alarm condition is
not present. If groups are used the user defined status will be displayed.
This example shows page two of the discrete alarms

13.3.1.2 Monitoring Ping Targets

View the status of all your ping targets from the M)onitor menu > P)ing targets option. This screen displays the
ping target ID, description, and IP address. Under Status the word Alarm will appear if an alarm has been
activated and Clear will appear if an alarm condition is not present.
The Ping info submenu allows you to change ping targets