Radius Dictionary File (Available On Resource Disk); Upgrade Firmware Via Ftp - DPS Telecom NetGuardian 240T Hardware User Manual

14.6

RADIUS Dictionary File (Available on Resource Disk)

# -*- text -*-
#
# dictionary.dps
#
#
#
#
VENDOR
#
# Standard attribute for NetGuardian RTU.
# All values are integer with 1 = True, 0 = False.
# If attribure does not exist in Access-Accept packet, default value will be 0.
#
BEGIN-VENDOR
ATTRIBUTE dps-admin
ATTRIBUTE dps-edit
ATTRIBUTE dps-monitor
ATTRIBUTE dps-SD-monitor
#To allow monitor of data port buffer/activity
ATTRIBUTE dps-reach-through
#To allow proxy to serial ports via TTY interface
ATTRIBUTE dps-telnet
#To allow telnet in and out of NetGuardian
ATTRIBUTE dps-control
#To allow manipulation of dry contact relay outputs
ATTRIBUTE dps-modem
#To allow dial in and out of NetGuardian
ATTRIBUTE dps-ppp
#To allow this user PPP (inbound) access to the NetGuardian
END-VENDOR
14.7

Upgrade Firmware via FTP

If your unit is accessible on the network, then new firmware can be sent to the unit via FTP.
To update firmware via FTP, follow these steps:
§
Start an FTP session with a command-line based ftp client.
o If using Microsoft Windows or MS-DOS, open a command terminal and enter "FTP". This will initiate an
ftp session.
§
Enter IP Address of the Unit
o Enter "Open XXX.XXX.XXX.XXX" with the IP of the unit in place of the X's.
A message should appear indicating the connection was made and will ask for a user.
DPS Telecom, Inc
For assistance or support, please contact support@dpstele.com
v1.0 Released - 1/23/09 (CBH/DPS)
DPS
DPS
DPS
2682
1 integer
2 integer
3 integer
4 integer
5 integer
6 integer
7 integer
8 integer
9 integer
51