Defining New Programs; Introduction; Program Menu - BIO RAD Bio-Plex Pro Instructions For Use Manual

Defining New Programs

Introduction

The following program items are available:

Program Menu

The Program menu has the following options:
The Program menu has the following structure:
PROGRAM
< > OK
START
< > EXIT OK
Bio-Plex Pro and Bio-Plex Pro II Wash Stations
The number of cycles the subsequent processing steps
CYCLE:
should be performed
ASP: An aspirate step removes liquid from the wells
DISP: A dispense step fills the wells with liquid
WASH: Liquid is dispensed and aspirated simultaneously
creating a circular flow with a maximum volume of 3000
µl in one wash step for increased wash efficiency
SOAK: During a soak step the liquid remains in the wells for the
set time (with or without shaking)
For collecting desired substances by vacuum filtration
VAC:
using filtration plates
User interaction is requested
USER PROMPT:
FINAL ASPIRATE: An aspirate step at the end of a program
END PROGRAM: The program finishes
Run a defined wash program
Start
Define/Edit Define or edit a program on the instrument
View the parameters of a defined program
Show
Clear Clear a wash program from the instrument's menu
DEFINE EDIT
< > EXIT OK
Defining New Programs
SHOW
< > EXIT OK
CLEAR
< > EXIT OK
53