Plate Washing Programs - BIO RAD Bio-Plex Pro Instructions For Use Manual

Basic Operation and Maintenance

Plate Washing Programs

Instructions for running the preconfigured wash program are detailed below.
Instructions for setting new Wash, Dispense, and Aspirate modes into a new wash
program, and instrument rinse instructions, are found in the Defining New Programs
section on page 53.
22
Navigate to PROGRAM in the primary
PROGRAM
menu and press OK.
< > OK
Use the keys under the < and > symbols to access the
Program menu if it is not already displayed
START
Press OK
< > OK
Select the required program and press
RUN1: Program X
OK to continue
< > EXIT OK
Choose OK.
SSSSSSSSSSSS
Rows are represented by S (selected) or
+ - OK
N (not selected). All rows should be
selected.
It is highly recommended that all wells
are selected and the entire plate is
washed.
Bio-Plex Pro and Bio-Plex Pro II Wash Stations