FORMA: Service & Maintenance manual - rev. 3.0
9.4.
UP-DOWN TEST
The procedure for testing the machine's up-down motor is invoked by simultaneously pressing the
"1", "3" and "4" keys when the machine is in standby mode. The machine display shows:
P A S S W O R D
0
To access the procedure it is necessary to type in the password which protects against unauthorized
use. After entering the password "2512" and pressing "Enter" to proceed, the machine initiates the
test:
• starts the tread-belt at 1 Km/h;
• increases the incline to 12%;
• on reaching this elevation, pauses for approximately 1 minute;
• returns the incline to 0%;
• on reaching this elevations, again pauses for 1 minute;
• increases the incline to 12%;
and so on until the "Stop" key is pressed.
Page 9.4