Disassembling The Display Boards - Technogym Forma Service Maintenance Manual

FORMA: Service & Maintenance manual - rev. 3.0

7.3. DISASSEMBLING THE DISPLAY BOARDS

Carry out the procedure described in paragraph
7.1. "Disassembling the display".
With the display placed on a work bench:
1. Unplug connectors a.
2. Remove the 4 fasteners b.
3. Remove the CPU BOARD.
4. Back off the 4 screws c using a medium
phillips screwdriver.
5. Remove the LED BOARD.
To reassemble the circuit boards, carry out the
above steps in reverse order.
Figure 7.3-1
Page 7.3