Wiring Diagram; Version Currently In Production - Technogym Forma Service Maintenance Manual

FORMA: Service & Maintenance manual - rev. 3.0

2.5. WIRING DIAGRAM

2.5.1. V
ERSION CURRENTLY IN PRODUCTION
This machine version, subsequently identified with the name Forma 3, has been in production
starting from SN 01000881. It differs from the preceding version as follows:
• Fan for improved cooling of the motor group;
• Electronic circuit board for starting the fan when the motor is running;
• New motor group equipped with scaled-up flywheel;
• New driving roller with larger diameter pulley;
• Hole in the guard for lubrication of the table;
• New inverter configuration parameters;
• New operating SW.
The wiring diagram is given below:
Page 2.2