Endress+Hauser Proservo NMS5 Operating Instructions Manual page 155

Proservo NMS5
Endress+Hauser
Fixing Wire Procedure
1. Put the wire drum on the desk and fix the wire by masking tape remaining 500mm wire.
Figure. 109: Wire and Wire Drum
2. Wind the wire toward the wire drum 2 times around the ring.
3. Wind the wire 10 times.
4. Keep a space as the triangle shape and wind the wire 10 times toward arrow A.
5. Wind the wire 10 times toward arrow B.
• Keep a certain amount of tension to the ring.
6. Wind the wire 10 times again.
7. Wind the wire 10 times toward arrow C.
8. Wind the wire 10 times toward arrow D.
• Leave the wind approximately 100mm to 200mm to mount it on the displacer.
This completes the fixing wire procedure.
Step 2
Step 6
Figure. 110: Fixing Wire
Steps 3 to 5
Keep a space as triangle shape.
Keep a certain amount of tention.
Steps 7 to 8
14 Appendix
Masking Tape
100mm to 200mm
155