10.9 Gauge Software; Contact Addresses Of Endress+Hauser - Endress+Hauser Proservo NMS5 Operating Instructions Manual

10 Diagnosis and Troubleshooting
96

10.9 Gauge Software

Software version / Date
V2.13, from 9.96
V2.20, from 10.97
V4.06, from 04.98
V4.06, from 04.98
V4.08X, from 08.98
V4.20, from 08.98
V4.20, from 09.98
V4.22, from 05.00
V4.23B, from 09.00
V4.24, from 04.01
V4.24 OSP, from 06.01
V4.24T&W, from 07.01
V4.24 T2, from 02.02
V4.25, from 09.02
V4.27, from 09.04
V4.27 T6/T&O, from11.05
V4.27 A, from 05.07
V4.27 B, from 09.08
V4.27 C, from 04.09
V4.27 E, from 03.10
V4.27 F, from 05.11
V4.27 G, from 05.12

10.10 Contact Addresses of Endress+Hauser

The addresses of Endress+Hauser are given on the back cover of this operating manual. If you have any
questions, do not hesitate to contact E+H representatives.
Software changes
Original Release
T2:TCB-2, Modified V1: R&S command
HART master, T4:TCB-4
HART master T&W, T4:TCB-4
upper stop speed reduction 3-step
WM550, Commuwin II display, elem. Error fix
T&W
HART line selection add to static matrix: gas temp.
minus data remote communication level 6 digit data pro-
cessing memory clear volume calculation matrix deleted
standard release, alarm output modify, NMT level
selection
standard release
Over Spill protection
T&W spec.
TCB-2 CPU, NMT, V1 level measurement
Density profile function
Level hold matrix, Error display on Home screen only
W&M and Overspill prevention
standard release
standard release
Proactive Safety function
DTM support
SIL
4-20mA long range support
Proservo NMS5
Documentation changes
BA001N/08/en/09.98
BA001N/08/en/11.97
BA001N/08/en/12.99
BA001N/08/en/12.99
BA001N/08/en/03.01
BA001N/08/en/02.02
BA001N/08/en/11.04
BA001N/08/en/03.06
BA1001N/08/en/12.08
BA1001N/08/en/04.09
BA00401G/08/en/01.11
BA00401G/08/en/02.11
BA00401G/08/en/03.13
Endress+Hauser