Flow Of Operation - YOKOGAWA DL7480 User Manual

1.2

Flow of Operation

1-2
The figure below provides an overview of the flow of operations when using the I
Signal Analysis Function. For details about specific items, see the referenced pages in
this manual or the respective sections in the DL7440/DL7480 User's Manual (IM701450-
01E) .
Before Using the Functions
• Installing the Instrument
• Connecting the Power Supply and
Turning ON/OFF the Power Switch
• Connecting the Probe
2
Setting I C Bus Signal Acquisition Conditions
• Setting Trigger Conditions
• Setting the Trigger Mode
• Setting the Record Length
Starting Acquisition of I
Stopping Acquisition of I
Performing the Analysis
Performing Searches
Page 1-28
*1. Indicates reference sections from the DL7440/DL7480 user's manual
(IM701450-01E).
*2. Indicates reference pages from this manual.
2
C Bus Signals
2
C Bus Signals
Saving Data from the
Detailed Analysis Results
*2
List
2
C Bus
*1
Section 3.2
*1
Section 3.3
*2
Page 1-3
*2
Page 1-4
*1
Section 6.1
*1
Section 7.2
*2
Page 1-9
*2
Page 1-9
*2
Page 1-25
*2
Page 1-35
IM 701450-51E