Conventions Used In This Manual - YOKOGAWA DL7480 User Manual

Conventions Used in This Manual

Safety Markings
Notations Used on Pages Describing Operating Procedures
Units
ii
The following marking is used in this manual.
Improper handling or use can lead to injury to the user or damage
to the instrument. This symbol appears on the instrument to
indicate that the user must refer to the user's manual for special
instructions. The same symbol appears in the corresponding place
in the user's manual to identify those instructions. In the manual,
the symbol is used in conjunction with the word "WARNING" or
"CAUTION."
Calls attention to actions or conditions that could cause serious
WARNING
injury or death to the user, and precautions that can be taken to
prevent such occurrences.
Calls attentions to actions or conditions that could cause light injury
CAUTION
to the user or damage to the instrument or user's data, and
precautions that can be taken to prevent such occurrences.
Note Calls attention to information that is important for proper operation
of the instrument.
On pages that describe the operating procedures in Chapter 1 through 3, the following
notations are used to distinguish the procedures from their explanations.
Procedure
This subsection contains the operating procedure used to carry out
the function described in the current chapter. All procedures are
written with inexperienced users in mind; experienced users may
not need to carry out all the steps.
Explanation
This section describes the setup items and the limitations regarding
the procedures.
Notations Used in the Procedures
Panel Keys and Soft keys
Bold characters used in the procedural explanations indicate characters that are marked on
the panel keys or the characters of the soft keys or menus displayed on the screen.
SHIFT + Panel Key
SHIFT+key means you will press the SHIFT key to turn ON the green indicator that is located
above the SHIFT key and then press the panel key. The setup menu marked in purple above
the panel key that you pressed appears on the screen.
Jog Shuttle &SELECT
Jog shuttle & SELECT indicates selecting or setting parameters and entering values using the
jog shuttle, the SELECT key, and other keys. For details on the procedure, see section 4.1 or
4.2 in the DL7440/DL7480 User's Manual (IM701450-01E) .
k Denotes 1000.
K Denotes 1024.
Example: 100 kS/s
Example: 459 KB (file data size)
IM 701450-51E