Flow Of Operation - YOKOGAWA DL7480 User Manual

2.2

Flow of Operation

2-2
The figure below provides an overview of the flow of operations when using the CAN Bus
signal analysis function. For details about specific items, see the referenced pages in
this manual or the respective sections in the DL7440/DL7480 User's Manual (IM701450-
01E) .
Before Using the Functions
• Installing the Instrument
• Connecting the Power Supply and
Turning ON/OFF the Power Switch
• Connecting the Probe
Setting CAN Bus Signal Acquisition Conditions
• Setting Trigger Conditions
• Setting the Trigger Mode
• Setting the Record Length
Starting Acquisition of CAN Bus Signals
Stopping Acquisition of CAN Bus Signals
Performing the Analysis
Performing Searches
Page 2-23
Using Cursors
Page 2-35
*1. Indicates reference sections from the DL7440/DL7480 user's manual
(IM701450-01E).
*2. Indicates reference pages from this manual.
Saving Data from the
Detailed Analysis Results
*2
List
*2
*1
Section 3.2
*1
Section 3.3
*2
Page 2-3
*2
Page 2-5
*1
Section 6.1
*1
Section 7.2
*2
Page 2-11
*2
Page 2-11
*2
Page 2-19
*2
Page 2-38
IM 701450-51E