Setting Spi Bus Signal Acquisition Conditions; Setting The Trigger Conditions Of The Spi Bus Signal - YOKOGAWA DL7480 User Manual

3.4

Setting SPI Bus Signal Acquisition Conditions

Procedure
VERTICAL
1
CH
2
CH
3
CH
4
CH
5
CH
6
CH
7
CH
8
CH

Setting the Trigger Conditions of the SPI Bus Signal

IM 701450-51E
The SPI Bus signal is acquired using the conditions of the four SPI bus signals* as
trigger conditions.
* SCK (clock signal), MOSI (master output slave input signal), MISO (master input slave output
signal), and SS (slave select signal)
HORIZONTAL TRIGGER
TRIG D
SEARCH ACTION
PRESET ZOOM MODE
V/DIV TIME/DIV
SIMPLE ENHANCED
DELAY
POSITION
LOGIC
SNAPSHOT CLEAR TRACE HELP
1. Press ENHANCED. The ENHANCED menu appears.
2. Press the Type soft key. The Type menu appears.
3. Press the SPI Bus soft key.
4. Press the SPI Setup soft key. The SPI Setup dialog box opens.
Setting the Notation System of Pattern A and Pattern B
5. Use jog shuttle & SELECT to set the notation system used to set Pattern A and
Pattern B to Hex or Bin (Pattern Format box). The format in the A Pattern and B
Pattern boxes changes accordingly.
• To exit the menu during operation, press ESC located
above the soft keys.
• In the procedural explanation below, the term jog shuttle &
SELECT refers to the operation of selecting/setting items
and entering values using the jog shuttle, SELECT and
RESET keys. For details on the operation using the jog
shuttle, SELECT, and RESET, see sections 4.1 or 4.2 in the
DL7440/DL7480 User's Manual.
• For a description of the operation using a USB keyboard or
a USB mouse, see section 4.3 in the DL7440/DL7480
User's Manual.
Set the notation system
of Pattern A and Pattern
B to Hex or Bin.
3
3-5