Analyzing/Searching Data - YOKOGAWA DL7480 User Manual

3.5

Analyzing/Searching Data

Procedure
MENU MENU
PRINT IMAGE SAVE
HISTORY
VERTICAL
1
CH
2
CH
3
CH
4
CH
5
CH
6
CH
7
CH
8
CH
IM 701450-51E
By setting analysis conditions, the SPI signal data stored to the acquisition memory can
be analyzed. You can also search analysis data that matches a data pattern or an
indefinite data condition. If analysis data that matches the specified condition is found,
the zoom position moves to the corresponding section, and the waveform of the data that
is found is displayed in the zoom waveform display frame.
SHIFT
ACQ START/STOP
HORIZONTAL TRIGGER
TRIG D
SEARCH ACTION
PRESET ZOOM MODE
V/DIV TIME/DIV
SIMPLE ENHANCED
DELAY
POSITION
LOGIC
SNAPSHOT CLEAR TRACE HELP
1. Press SHIFT+ZOOM (SEARCH). The SEARCH menu appears.
2. Press the Type soft key. The Type menu appears.
3. Press the To Page 2 soft key.
4. Press the SPI Bus soft key.
Depending on the model, the SPI Bus item may appear under the Type menu (Page
No. (1/2)) without having to press the To Page 2 soft key.
• To exit the menu during operation, press ESC located
above the soft keys.
• In the procedural explanation below, the term jog shuttle &
SELECT refers to the operation of selecting/setting items
and entering values using the jog shuttle, SELECT and
RESET keys. For details on the operation using the jog
shuttle, SELECT, and RESET, see sections 4.1 or 4.2 in the
DL7440/DL7480 User's Manual.
• For a description of the operation using a USB keyboard or
a USB mouse, see section 4.3 in the DL7440/DL7480
User's Manual.
3
3-23