Communication Commands - YOKOGAWA DL7480 User Manual

1.8

Communication Commands

Command
2
I C Analyze Group
:SEARch:I2C?
:SEARch:I2C:ANALyze?
:SEARch:I2C:ANALyze:ABORt
:SEARch:I2C:ANALyze:EXECute
:SEARch:I2C:ANALyze:SETup?
:SEARch:I2C:ANALyze:SETup:CLOCk?
:SEARch:I2C:ANALyze:SETup:CLOCk:HYSTeresis
:SEARch:I2C:ANALyze:SETup:CLOCk:LEVel
:SEARch:I2C:ANALyze:SETup:CLOCk:SOURce
:SEARch:I2C:ANALyze:SETup:DATA?
:SEARch:I2C:ANALyze:SETup:DATA:LEVel
:SEARch:I2C:ANALyze:SETup:DATA:SOURce
:SEARch:I2C:ANALyze:SETup:MPOSition Sets the reference position when the analysis* reference point is set
:SEARch:I2C:ANALyze:SETup:RPOint
:SEARch:I2C:LIST? {<NRf>}
:SEARch:I2C:SEARch?
:SEARch:I2C:SEARch:ADDRess?
:SEARch:I2C:SEARch:ADDRess:ACK
:SEARch:I2C:SEARch:ADDRess:HEXa
:SEARch:I2C:SEARch:ADDRess:MODE
:SEARch:I2C:SEARch:ADDRess:PATTern Sets the pattern of the address pattern search on the analysis* result in
:SEARch:I2C:SEARch:DATA?
:SEARch:I2C:SEARch:DATA:ACK
:SEARch:I2C:SEARch:DATA:HEXa
:SEARch:I2C:SEARch:DATA:MODE
:SEARch:I2C:SEARch:DATA:PATTern
1-38
This section contains only the communication commands related to the I
analysis function. For a description of other DL7440/DL7480 communication commands,
see the DL7440/DL7480 Communication Interface User's Manual (IM701450-17E) .
Function
Queries all settings related to the analysis* function.
Queries all settings related to the execution of the analysis.*
Aborts the execution of the Analysis.*
Executes the analysis.*
Queries all settings related to the analysis* conditions.
Queries all settings related to the clock channel of the analysis* conditions. 1-41
Sets the clock channel hysteresis of the analysis* conditions or queries the 1-41
current setting.
Sets the clock channel level of the analysis* conditions or queries the
current setting.
Sets the clock channel source waveform of the analysis* conditions or
queries the current setting.
Queries all settings related to the data channel of the analysis* conditions. 1-42
Sets the threshold level of the data channel of the analysis* conditions or
queries the current setting.
Sets the data channel source waveform of the analysis* conditions or
queries the current setting.
manually or queries the current setting.
Set whether to make the trigger point the analysis* reference point or set
the reference point manually.
Outputs one byte of analysis* result as a character string.
Queries all settings related to the analysis* result search.
Queries all settings related to the address pattern search on the analysis*
result.
Sets the Ack condition of the address pattern search on the analysis* result 1-43
or queries the current setting.
Sets the pattern of the address pattern search on the analysis* result in
hexadecimal.
Enables or disables the address pattern when searching the analysis*
result or queries the current setting.
binary or queries the current setting.
Queries all settings related to the data pattern search on the analysis*
result.
Sets the Ack condition of the search using the data pattern on the analysis* 1-43
result or queries the current setting.
Sets the pattern of the data pattern search on the analysis* result in
hexadecimal.
Enables or disables the data pattern when searching the analysis* result
or queries the current setting.
Sets the pattern of the data pattern search on the analysis* result in binary 1-44
or queries the current setting.
2
C Bus signal
Page
1-41
1-41
1-41
1-41
1-41
1-42
1-42
1-42
1-42
1-42
1-43
1-43
1-43
1-43
1-43
1-43
1-43
1-43
1-44
1-44
IM 701450-51E