19 CLEANING
19.1 Surfaces
19.2 Sensor holders
20 SERVICE
21 DEVICE LABEL
User's manual
NOTE
When cleaning the unit surfaces, always disconnect the
unit from mains.
The unit surfaces can be cleaned with a soft cloth damped
in a mild cleaning solution.
Stronger agents can be used for disinfecting the surfaces.
We recommend Dürr System-hygiene FD 322 or
respective disinfecting solution.
See the manufacturer's instructions for cleaning.
To guarantee user and patient safety and to ensure image
quality the unit must be checked and recalibrated by a
qualified PLANMECA service technician once a year or
after every 10 000 exposures if this is sooner. Please
refer to the Planmeca Prox Technical Manual for
complete servicing information.
19 CLEANING
Planmeca ProX
41