Premolar And Canine Exposure; Selecting The Exposure Parameters - Planmeca ProX User Manual

10 PREMOLAR AND CANINE EXPOSURE

10.1 Selecting the exposure parameters

Digital maging mode Imaging plate mode
Film based imaging mode
Child
User's manual
The preprogrammed exposure values are shown in
section 15 "EXPOSURE VALUES" on page 30.
Check that you are in the desired imaging mode: digital,
imaging plate or film-based imaging mode.
The imaging mode can be changed by pressing the
MODE key for 2 seconds.
Select the adult or child mode. The indicator light of the
selected projection will come on.
Adult
Select the premolar and canine exposure region with the
pre-programmed setting keys. Press the premolar and
canine key once to select the projection of the maxilla,
and press the key twice to select the projection of the
mandible. The indicator light of the selected projection will
come on.
The preprogrammed time, kV and mA values appear on
the respective displays.
The preprogrammed time, kV and mA values can be
temporarily changed with the parameter adjustment keys.
This will not affect the preprogrammed values.
Select the parameter to be adjusted with the SELECT
key.
When the parameter value is flashing on the kV display,
the anode voltage can be changed with the parameter
adjusting keys.
When the parameter value is flashing on the mA display,
the anode current can be changed with the parameter
adjusting keys.
10 PREMOLAR AND CANINE EXPOSURE
Planmeca ProX 19