Mobile Base - Planmeca ProX User Manual

6.3 Mobile base

6.3.1 Transporting Planmeca ProX mobile x-ray unit
User's manual
CAUTION
The Planmeca ProX mobile X-ray unit has to be in
transport position when on surface inclined 5° or
more.
1. Secure the support arm to the transport position with
strap.
CAUTION
Never move the Planmeca ProX mobile x-ray unit
without first securing the support arm to the transport
position.
2. Disconnect the Planmeca ProX from the power supply
and loop the cable around the handle.
3. Transport the Planmeca ProX Mobile X-ray unit carefully
from the handle.
CAUTION
The mobile Planmeca ProX X-ray unit is to be moved
only from the handle. Not moving from the handle
might cause the mobile unit to overbalance.
NOTE
If you have to move the ProX Mobile X-ray unit over a low
obstacle, tilt the base slightly by pressing the back of the
wheel assembly with your foot.
4. When the unit has been transported to the desired area
lock the wheels by pressing the lever down to prevent the
unit from moving.
CAUTION
Always lock at least two of the four wheels before tak-
ing your hand off the handle.
6 MAIN PARTS
Planmeca ProX 7