Table of contents
17
EXPOSURE VALUE TABLES ............................................................................................ 38
17.2 Planmeca ProScanner ............................................................................................................... 39
18
ERROR CODES ............................................................................................................... 40
19
CLEANING ....................................................................................................................... 41
19.1 Surfaces ..................................................................................................................................... 41
19.2 Sensor holders ........................................................................................................................... 41
20
SERVICE ......................................................................................................................... 41
21
DEVICE LABEL ................................................................................................................ 41
22
22.1 Technical data ........................................................................................................................... 42
22.2 Dimensions (in mm) ................................................................................................................... 44
22.4 Installation options ..................................................................................................................... 47
23
DISPOSAL OF THE UNIT ................................................................................................. 52
The manufacturer, assembler and importer are responsible for the safety, reliability and
performance of the unit only if:
- installation, calibration, modification and repairs are carried out by qualified author-
ised personnel
- electrical installations are carried out according to the appropriate requirements such
as IEC 60364
- equipment is used according to the operating instructions.
Planmeca pursues a policy of continual product development. Although every effort is
made to produce up-to-date product documentation this publication should not be re-
garded as an infallible guide to current specifications. We reserve the right to make
changes without prior notice.
COPYRIGHT PLANMECA
Publication number 10029963 Revision 7
Released 23 February 2016
2
Planmeca ProX
User's manual