Planmeca ProX User Manual page 19

8.2.6 Ready indicator light
8.2.7 Exposure key
8.2.8 Exposure warning indicator light
User's manual
The green ready indicator light will come on when the unit
is ready to take an exposure. The waiting time between
exposures is 12 times exposure time, but always at least
6 seconds.
In the programming mode the ready light will start to flash.
NOTE
You can set the unit so that the Ready indicator light will
only come on when Planmeca Romexis is ready for the
exposure, i.e. the message
on the computer screen. To change the settings of the unit
contact your Planmeca technical support.
When you take an exposure you must press and hold
down the exposure key for the entire duration of the
exposure.
The yellow exposure warning light will come on when you
take an exposure. You will also hear an audible warning
sound during the exposure.
8 CONTROL PANEL
Waiting for exposure
appears
Planmeca ProX 15