Planmeca ProX User Manual page 9

4 SAFETY PRECAUTIONS
WARNING
IT IS VERY IMPORTANT THAT THE PLACE WHERE
THE UNIT IS TO BE USED AND THE POSITION
FROM WHICH THE USER IS TO OPERATE THE
UNIT ARE CORRECTLY SHIELDED. SINCE RADIA-
TION SAFETY REQUIREMENTS VARY FROM
COUNTRY TO COUNTRY AND STATE TO STATE IT
IS THE RESPONSIBILITY OF THE USER TO
ENSURE THAT ALL LOCAL SAFETY REQUIRE-
MENTS ARE MET.
WARNING
To protect the user from stray radiation control of the
X-ray unit must be from a distance of not less than 2
metres from the focal spot or X-ray beam.
WARNING
This X-ray unit may be dangerous to both patient and
operator unless safe exposure values are used and
correct operating procedures are observed.
CAUTION
The SIP/SOP shall not be used in Planmeca ProX,
but only for connecting Planmeca ProSensor device.
CAUTION
Do not connect a multiple portable socket outlet
(MPSO) or extension cord to the system.
CAUTION
Do not connect items which are not specified as part
of the system.
CAUTION
Do not spill water on the X-ray unit.
NOTE
Electromagnetic interference between the equipment and
other devices can occur in very extreme conditions. Do not
use the equipment in close conjunction with sensitive
devices, or devices creating high electromagnetic
disturbances.
User's manual Planmeca ProX 5