User's Manual Planmeca Prox - Planmeca ProX User Manual

16 PROGRAMMING EXPOSURE VALUES
Press the SELECT key again briefly, the mA display will
start to flash and the kV value is stored in the memory.
The mA value can now be changed with the parameter
adjustment keys.
You can now select a new exposure region or exit the
programming mode by pressing and holding down the
SELECT key (about 4 seconds). You will hear a signal
tone.
NOTE
If you interrupt programming for over 45 seconds, the unit
automatically exits the programming mode, and the
current values will be stored in the memory.
User's manual Planmeca ProX 37