Tektronix TDS7000 Series Programmer's Manual page 511

WFMOutpre:YOFf?
Description
This query-only command returns the vertical offset in digitized levels for the waveform specified by the
DATa:SOUrce command. For those formats in which BYT_NR is important (all non-floating point
formats), this command must take the location of the binary point implied by WFMOutpre:BYT_Nr into
consideration.
An error is reported if the DATa:SOUrce waveform does not exist.
Group
Waveform Transfer
Related Commands
DATa:SOUrce (see page 472), WFMOutpre:BYT_Nr (see page 498)
Syntax
WFMOutpre:YOFf?
Example
WFMOutpre:YOFf?
This query might return , indicating that the position indicator for the
:WFMOUTPRE:YOFF -50.0000E+0
waveform was 50 digitizing levels (2 divisions) below center screen.
509