Tektronix TDS7000 Series Programmer's Manual page 101

DIAg:SELect:TEST
Description
This command (no query form) selects one of the available tests. This command is equivalent to
selecting Instrument Diagnostics from the Utilities menu and then choosing a Test from the drop-down
list.
Note: This command should be executed only if DIAg:LEVEL is currently set to TEST.
Group
Diagnostics
Related Commands
DIAg:SELect:AREA (see page 96), DIAg:SELect:SUBSYS (see page 98), DIAg:SELect:LAST (see page
97), DIAg:NUMITEMS (see page 91)
Syntax
DIAg:SELect:TEST <NR1>
Arguments
• <NR1>
This selects a test by number, which can range from 1 through 15 (as specified by DIAg:NUMITEMS).
Example
DIAg:SELect:TEST 1
This command selects Test 1 as the test to be executed.
99