Vertical Command Group; Vertical Overview - Tektronix TDS7000 Series Programmer's Manual

Vertical Command Group

Vertical Overview

You use the commands in the Vertical Command Group to control the vertical setup of all live (channel)
waveforms for acquisition and to control the display of channel, reference, and math waveforms. This
group contains commands to set up vertical parameters for electrical or optical signals, depending on the
sampling module in use.
The SELect:<wfm> command also selects the waveform that many commands in other command
groups use.
You may replace VOLts with SCAle in the vertical commands. This provides program compatibility with
earlier models of Tektronix oscilloscopes.
425