Tektronix TDS7000 Series Programmer's Manual page 294

NEWpass
Description
This command (no query form) changes the password that enables access to password protected data.
The PASSWord command must be successfully executed before using this command or an execution
error will be generated.
Group
Miscellaneous
Related Commands
PASSWord (see page 293), *PUD (see page 324)
Syntax
NEWpass <QString>
Argument
• <Qstring>
This is the new password, which can contain up to 10 characters.
Example
NEWpass "mypassword"
This command creates a new password for accessing your protected data.
292