Tektronix TDS7000 Series Programmer's Manual page 302

VERBose
Description
This command sets and queries the Verbose state that controls the length of keywords on query
responses. Keywords can be both headers and arguments. This command does not affect IEEE Std
488.2-1987 Common Commands (those starting with an asterisk).
Group
Miscellaneous
Related Commands
HEADer (see page 289), *LRN? (see page 276), SET? (see page 295)
Syntax
VERBose {OFF|ON|<NR1>}
Arguments
• OFF
This sets the Verbose State to true, which returns full-length keywords for applicable setting queries.
• ON
This sets the Verbose State to false, which returns minimum-length keywords for applicable setting
queries.
• <NR1>
A 0 returns minimum-length keywords for applicable setting queries; any other value returns full-length
keywords.
Example 1
VERBose ON
This command enables the Verbose setting.
Example 2
VERBOSE?
This query might return
:VERBOSE 0
300
, indicating that the Verbose state is disabled.